Steam Crave Hadron Pro DNA250C
Similar products
Product classification
Product description
At its core is one of the highest quality chips on the market, the Evolv DNA250C. Thanks to this chip, stable operation of the mod, perfect temperature modes and efficient ignition start-up are ensured. The mod offers robust processing and a solid metal construction. Its dimensions are 59 x 36.66 x 116.1 mm. It is equipped with a 510 type thread at the top and is compatible with any atomizer with the same type of thread. It is also ideally suited for use with the Ragnar atomizer from the same manufacturer. The DNA250C chip itself will offer a wide range of features and custom variable settings using the additional Escribe software. The mod works with Replay, Boost, VW and TC modes.
Thanks to the chip you can also enjoy a variety of safety protections. Atomiser protections such as short circuit or low resistance are not to be missed. You will also find protection against overheating, reverse polarity or low voltage. At the core is a massive Li-Po 4S battery with a capacity of 1600 mAh, which can cope with enormous power, heavy loads and long endurance. In addition, you'll be able to conveniently recharge the battery directly in the device thanks to the micro USB port with support for fast charging up to 3 A. The Steam Crave Hadron Pro DNA250C is designed for the most demanding users and for advanced users looking for a device with a wide range of customization and custom settings. You won't be bored for a second with this rugged mod.
|
Product parameters:
Rozměry: 59 x 36,66 x 116,1 mm
Kapacita baterie: 1600 mAh (Li-Po 4S baterie)
Výstupní výkon: 1 - 400 W
Vstupní napětí: 6,0 - 16,8 V
Napětí baterie: 12 - 16,8 V (3,0 - 4,2 V, 4S)
Výstupní napětí: 0,2 - 16,8 V
Rozsah proudu: 0,5 - 30 A
Nastavení teploty: 200 - 600 °F
Výstupní režimy čipu DNA250C: Replay / Boost / VW / TC
Čip: Evolv DNA250C
Podporovaný odpor: 0,1 - 3,0 ohm
Dobíjení: micro USB (3A, doporučený dobíjecí proud 2A)
Váha: 416,9 g
Závit: 510
|
|
Package contents:
1x Steam Crave Hadron Pro DNA250C mod
1x micro USB connection cable 1x user manual |
|
Robust workmanship
Steam Crave Hadron Pro is a robust and robust mod with a metal body and larger dimensions. Yet its design feels comfortable in the hand and is easy to use as well. There is an ergonomically placed glow button and control panel in the front. The dimensions of the mod are 59 x 36.66 x 116.1 mm and its weight is 416.9 g. It is available in three colours.
|
|
Powerful Li-Po battery
Inside the body of the mod is a partially integrated battery with extreme power and long life. It is a Li-Po 4S battery with a capacity of 1600 mAh. This battery ensures smooth operation of the mod and trouble-free use also with higher output powers.
|
|
Extreme performance
The basic output mode of the mod is the power mode. This operates with a maximum power of up to 400W, so it is an extreme device that can be used from MTL coating to heavy duty and low resistance direct lung coating or cloud chasing. The power range can satisfy absolutely any vaper.
|
|
Thread 510
In the top part of the module there is a 510 type thread with a gold plated centerpin. The top part of the module offers enough space for any atomizer with 510 thread type. It can therefore also be used with atomizers from the same manufacturer, for example with Ragnar RDTA or Supreme V3 RDTA atomizers. You don't have to worry about any unsightly atomizer overhangs over the edges of the mod.
|
|
Fast charging support
At the front of the control panel there is a port for connecting a charging cable. This is a micro USB port. The mod supports extremely fast and efficient charging with a current of up to 3 A. You will then conveniently monitor the charging status directly on the mod display.
|
Product parameters
product_rating_empty
product_rating_empty